PMS 350 R 30

PMS 350 R 30
  • Type
  • :
  • PMS 350 / R 30
  • Body Rotation
  • :
  • 4100
  • Engine Power
  • :
  • 18,5 Kw- 3000 d/dk
  • Body Diameter
  • :
  • 354
  • Body Material
  • :
  • DIN 1.4462 (DUPLEX)
  • L/D
  • :
  • 3,3
  • Max G Force
  • :
  • 3326
  • Capacity
  • :
  • 3000 lt/h
 
Product is delivered into the decanter’s drum by the mono-pump. Here, as the results of the applied G forces, the 12% solid and 88% liquid contents in the products are being separated from each other in the superb quality. Liquid content is delivered to the decanter’s lower container through rear channel and then, discharged from there out of the system. The solid content is proceeded to the front side of the decanter. From that point, it is taken into the stock tank. Gearbox assembled at the front part of the drum provides the discharge of the solid content out of the system, through creating a certain rotation difference between the drum and the internal spiral. Spiral coils have been plated with the tungsten carbide, hardness of which is 60-65 Rockwell. The reason for this application is to decrease the wearing to the minimum level, which might be occurred in time. 

All of the surfaces and equipments, with which the product has contacts following to its entering into the decanter, are produced from the inox material in compliance with the food codex. The main chassis, which provides the bearing for the decanter’s drum, has been manufactured from the St-37 steel.



The distinguishing features of the Polat Machinery’s decanter are respectively as follows:
• It operates 2 phase.
• It is resistant against sudden shocks at a ratio of 500%, due to its specific gearbox structure and its gearbox possesses the special characteristic to absorb the strokes happened during the sudden starts and stops.
• It does not be effected by the fluctuations in the electric supply, with the help of the inverter added to the system.