Right Choice for Petroleum and Mineral Oil Applicaitons

It has a direct relation with the competency of maximizing the profitability, increasing energy efficiency, reducing costs, decreasing emissions, effectively using the operation fields and optimizing production efficiency based on the market demands. Polat Makina has the most suitable product portfolio for petroleum and mineral oil applications. It offers you an approved and reliable technology so that you can come over the challenges in the production process based on the qualification of the service.

Making use of energy is the requirement and fundamental right of the modern era. It is of vital importance to assess the energy resources, observe the public interest in the production, transmission and distribution phases and maintain the negative impacts on the climate and nature in the minimum level. This criterion should be valid and enforceable for each and all activities related to energy. As Polat Makina, we pay regard for all such processes with all details.

In today’s world, products containing petroleum are of vital importance not only for our geography but also for the whole world. This importance will maintain its existence increasingly in the future. Raw petrol resources and reserves are being consumed rapidly. Reducing the impacts of wastes caused by such resources on the environment and recycling petrol products are of crucial importance in this regard. As Polat Makina, we take into consideration low energy cost and low CO2 emission and offer centrifuge technologies which recycle the wastes in the highest level as the result of detailed R&D works.

INDUSTRIAL CENTRIFUGE TECHNOLOGIES
By thinking about the next step of the constantly developing technology, we offer environment-friendly solutions as the result of our intense engineering and R&D researches. Polat Makina offers solutions which can be applied in various fields through its automatic, reliable, constant and fast-operating centrifuge equipment which provide problem-free process control.

Horizontal and vertical centrifuge equipment as 2 phases or 3 phases are used actively in petrol industry to separate various oil, water and solid emulsions. We define horizontal centrifuge equipment as decanter and vertical centrifuge equipment as separator. While 2-phase decanters enable products which have high solid material amount to go through solid and liquid separation, the products which require 3-phase centrifuge equipment are enabled to go through solid, liquid and liquid-liquid separation process. While 2-phase separator enables very low amount of solid materials to be removed from the mineral oils, we offer solutions for the separation process of very low amount of products which contain oil and liquid when required.

Primary usage areas of decanter and separator in petroleum industry:

  • Separating solid materials and water contained in the raw material,
  • Separating the solid materials accumulated on the bases of tanks where raw petrol is stored from the raw petroleum,
  • Processing slop oils,
  • Processing the oily sludge of petroleum refineries,
  • Recycling of oil and water in oil accumulation and drying areas,
  • Separating the water and solid particles inside the fuel and waste engine oils.

Advantages offered:

  • Special ATEX certified design meeting the general standards of fire protection and explosion,
  • Feature to operate in low and high temperatures,
  • Different product portfolio in reasonable capacities,
  • Customized design and R&D activities,
  • High protection for abrasive and corrosive materials,
  • Design in line with occupational health and safety,
  • Low energy consumption and low labor cost,
  • Constant process optimization through PLC and SCADA control,
  • Less area requirement,
  • Low carbon foot print,
  • Low maintenance cost,
  • Solution oriented and fast service supply.
Segments

Petroleum and Mineral Oil Solutions

Industrial Decanters

Industrial Decanters

Polat Makina centrifuge decanters are developed for products which are required to go through solid-liquid-liquid phase separation. They are designed as double engine driving system and VFD. Thanks to differential rate adjustment and adjustable pool depth at optimum point depending on the product, maximum efficiency is provided.

  Contact Us...

Contact Our Sales Representative

Industrial Separators

Industrial Separators

Polat Makina separators are designed to operate for 24 hours without any interruption in compliance with CIP system in capacities to meet your need. Our separators which have automatic cleanable barrel are in compliance with DIN 11850 and ISO 2037 norms and standards.

  Contact Us...

Contact Our Sales Representative

Industrial Decanters

Industrial Decanters

Polat Makina centrifuge decanters are developed for products which are required to go through solid-liquid-liquid phase separation. They are designed as double engine driving system and VFD. Thanks to differential rate adjustment and adjustable pool depth at optimum point depending on the product, maximum efficiency is provided.

  Contact Us...

Contact Our Sales Representative

Industrial Separators

Industrial Separators

Polat Makina separators are designed to operate for 24 hours without any interruption in compliance with CIP system in capacities to meet your need. Our separators which have automatic cleanable barrel are in compliance with DIN 11850 and ISO 2037 norms and standards.

  Contact Us...

Contact Our Sales Representative

Industrial Decanters

Industrial Decanters

Polat Makina centrifuge decanters are developed for products which are required to go through solid-liquid-liquid phase separation. They are designed as double engine driving system and VFD. Thanks to differential rate adjustment and adjustable pool depth at optimum point depending on the product, maximum efficiency is provided.

  Contact Us...

Contact Our Sales Representative

Industrial Separators

Industrial Separators

Polat Makina separators are designed to operate for 24 hours without any interruption in compliance with CIP system in capacities to meet your need. Our separators which have automatic cleanable barrel are in compliance with DIN 11850 and ISO 2037 norms and standards.

  Contact Us...

Contact Our Sales Representative

Industrial Separators

Industrial Separators

Polat Makina separators are designed to operate for 24 hours without any interruption in compliance with CIP system in capacities to meet your need. Our separators which have automatic cleanable barrel are in compliance with DIN 11850 and ISO 2037 norms and standards.

  Contact Us...

Contact Our Sales Representative

Industrial Decanters

Industrial Decanters

Polat Makina centrifuge decanters are developed for products which are required to go through solid-liquid-liquid phase separation. They are designed as double engine driving system and VFD. Thanks to differential rate adjustment and adjustable pool depth at optimum point depending on the product, maximum efficiency is provided.

  Contact Us...

Contact Our Sales Representative

Success Stories

"We have come across with very high efficiency in test procedures of Polat decanter. It reduced the sludge density from 69 (ft3/lb) to 65(ft3/lb), which is significant to us. We believe that we made the right choice."

Süleyman Erbek

Project Manufacturing Manager, TPAO

Service & Support

We offer warranty, product updates and maintenance and Repair service with the help of our experienced teams in our comprehensive and authorized service network in all maintenance and repair works and therefore, we prolong the lifetime of your investment.

  Read more...

Polat Makina Industrial Solutions Catalogue

  PDF (5.7 mb)
Turn-key Solutions Delivery

We produce customized equipment based on your needs

Consultancy & Assessment

After obtaining the information and findings related to your production processes, we provide key solutions covering the planning of the infrastructure and equipment in compliance with your industrial facility and technical engineering.

Equipment Design

Our engineering team who designs the most suitable solution for your project and 3D-aided professional software of Polat Makina provide opportunity to perceive all operations on the part in detail with the help of the simulation.

Equipment Production

Parts of the equipment to be produced are prepared in CNC benches through utmost sensitivity. 5-Axis benches are used in Polat Makina which is the close follower of technology in order to provide production of higher quality to accelerate the processing methods.

Installation and Support

Providing the services such as installation of the machinery on customer field, activating the machinery, realizing demo production, maintenance and repair activities under warranty and training on use, Polat Service Center also offers spare part and service in national and international scale with its 40-people experienced service personnel.